A hand-held GPS tells you exactly where you are. It says nothing about what lies beneath you or what is waiting two miles ahead. That is the chart's job, and no amount of satellite positioning has changed it. A nautical chart is a dense, carefully coded picture of the seabed, the shoreline, the hazards and the aids to navigation, drawn to a standard used across the world. Learning to read one properly is the difference between a confident passage and a nervous one.
Charts come as paper sheets, laminated folios and digital raster or vector displays. Whatever the format, the principle is the same: the chart shows the least water you are likely to encounter, plus everything you need to avoid. Paper has one advantage worth remembering — it never runs out of battery, and it doesn't zoom out just when you need detail.
Start with the scale, printed near the title. A small-scale chart, perhaps 1:150,000, covers a wide stretch of coast and is ideal for passage planning. A large-scale chart at 1:25,000 or 1:12,500 shows harbour entrances, channels and moorings in fine detail. Serious coastal work usually needs both.
Depths are measured from chart datum, which is set at about the lowest tide that can reasonably be expected. This means the numbers are deliberately pessimistic: the actual depth is usually greater. Add the height of tide for your chosen hour and you have a real figure.
Distances are measured in nautical miles (1,852 metres), with smaller distances given in cables, one tenth of a mile. The compass rose shows true and magnetic north, along with the annual change in magnetic variation — small in most of the UK, but not zero, and worth noting on any long passage.
Once you understand the numbers, a chart stops looking like static and starts looking like terrain.
The working sum is simple: charted depth plus height of tide gives the water available. Do it for the hour you will actually be there, not for high water because it suits the plan.
Hazards are drawn with remarkable precision once you know the grammar.
Scattered across the chart you will spot small lettered diamonds. Each letter links to a table giving the direction and rate of the tidal stream at that spot, hour by hour, relative to high water at a standard port. For a slow craft, the stream often matters more than the wind — an hour of foul tide can add miles to a day's paddle or sail.
Use a tidal stream atlas for the wider picture, and remember the rule of twelfths for a rough estimate of how the tide builds and falls. Springs and neaps behave differently, and in estuaries the turn of the stream can lag well behind high or low water.
Now put it together for your own craft. A kayaker draws perhaps half a metre and worries about swell, landing spots and headland races at spring ebb. A sailing yacht needs its draught plus a clear safety margin, and a note of which anchorages dry out. A ferry or RIB running a marked channel needs the buoyage and any crossing or restricted areas.
Check the chart's edition date and any corrections issued since. Plot the route, mark the tidal gates, note at least one alternative harbour, and keep the chart in reach even when the plotter is on. Reading it well takes an afternoon of practice — and it will repay you every time the fog rolls in.
Leave A Comment